Code: bl-7000slx
The BL-7000SLX is our heaviest-duty portable car and truck lift system. Reinforced upper frame rails give this lift enough strength to effortlessly raise light-duty trucks and SUVs. For higher ground-clearance vehicles, don’t forget to pick up our truck adapter set. The extra spacers will offer an additional 5″ of lifting height!
€1.425,00 Ex. VAT
Out of stock
- Description
- Additional information
- Reviews (0)
Description
Overview
BL-7000SLX portable car lift system
It’s the truck owner’s delight: the Quickjack BL-7000SLX is our most powerful portable truck lift. It’s the same overall length as the BL-5000SLX, but the frames are reinforced in order to safely handle light trucks and SUVs up to 7,000 lbs. The response to this model, which has been available for several years now, is one of our best-selling portable car lift assemblies. The fact that it sits a mere 3.5″ above the ground is remarkable. It’ll lift a Ford Raptor without a problem, but it will also comfortably lift a Mini Cooper. That should give you a sense of how versatile these frames truly are.
The mobile auto repair game changes the moment QuickJack hits your floor. Despite the extra heft, the BL-7000SLX still reaches its max rise in mere seconds. Plus, an optional truck/SUV adapter kit is the perfect way to get even more rise out of high-clearance vehicles. Sound good? You’re just a few clicks away from garage heaven.
The BL-7000SLX is a 7,000-lb. capacity portable car lift that’s designed, engineered and manufactured by the same people who make traditional heavy-duty car lifts and truck lifts for professional shops and garages around the world. But like its “smaller” siblings (theBL-3500SLXandBL-5000SLX), the BL-7000SLX was born to be taken anywhere. No bolts. No wiring. Just two frames, a power source and a whole lot of mean. Throw it in a large trunk, backseat or truck bed when you need lifting power to go. Store the space-saving frame almost anywhere when it’s not in use.
Please note:the collapsed profile of the BL-7000SLX is about one-half-inch higher than the BL-3500SLX and BL-5000SLX models. This may impact your ability to use the BL-7000SLX on some low-clearance vehicles.
If you need to reach longer wheelbases than permitted by this car lift, check out theextended-length BL-7000EXT.
Features Quickjack BL-7000SLX
Automatic safety locks
Lower and upper safety locks automatically engage as the car lift frames rise. They quickly disengage with a simple flip of the lock bar. They’re like built-in, heavy-duty jack stands. (But cool.)
Zero-leak fittings
Even when the car lift frames are under a full 7,000-lb. load, the hydraulic connectors do not leak. Keep your nice garage flooring clean and oil-free.
Reinforced upper frame rails
For the BL-7000SLX, our largest-capacity QuickJack car lift system, we reinforced the upper frame rails of with box-welded steel. This significantly minimizes deflection, improving power without requiring longer frames.
Open-center design
The BL-7000SLX is all about more power with less interference. Inspired by two-post car lifts that engage vehicle frames, our open-center design offers full access to your vehicle’s wheels and undercarriage. An optional truck/SUV adapter provides even more undercarriage clearance.
Tech specs
Lifting capacity
7,000 lbs. (3,175 kg)
Lowered height
A–Frame only:3.5″ (89 mm)
B–With 2″ block:3.75″ (95 mm)
Lifting height
C–Frame only:18″ (457 mm)
D–With 2″ block:18.25″ (464 mm)
E–With 3″ block:19.25″ (489 mm)
F–Max. height:21.25″ (540 mm)
G–With adapters:21.25″ (540 mm)
H–With adapters + pin:24″ (610 mm)
Lift point spread
I–Maximum:60″ (1,524 mm)
J–Minimum:31.5″ (800 mm)
Frame dimensions (ea.)
K–Width:12.5″ (318 mm)
L–Length:70″ (1,778 mm)
A–Height:3.5″ (89 mm)
Weight:96 lbs. (44 kg)
Other specs
Time to full rise:30 seconds
Power unit weight:15 lbs. (7 kg)
Total shipping weight:242 lbs. (110 kg)
What’s inside? Quickjack BL-7000SLX
BL-7000SLX Left Frame Assembly
BL-7000SLX Right Frame Assembly
1x Hydraulic power unit with control
4x Medium rubber lift blocks (2″)
4x Tall rubber lift blocks (3″)
2x Short hydraulic hoses
2x Long hydraulic hoses
2x Frame-positioning handles
Fittings and thread tape for setup
Instruction manual
Requirements:
3 liters of Automatic Transmission Fluid
Air source to inflate air cylinders up to 50 PSI
Assembly tools
Note: QuickJack is shipped in three boxes
View All Shipping Weights & Dimensions
Do you ship to my country?
The Quickjack BL-7000SLX is manufactured by the biggest autmotive supplier, BendPak
Additional information
Dimensions | 160 × 40 × 160 cm |
---|
Reviews
There are no reviews yet.
Be the first to review “Quickjack BL-7000SLX”
Related products
QuickJack Portable Car Lifts
Motorcycle Lift KitThe QuickJack Motorcycle Lift Adapter Kit turns your portable car lift into a portable motorcycle service lift. Simply slide the QuickJack frames together, rest the lightweight aluminum platform on top and secure the assembly with a single pass-through locking pin. The stylish cold-formed diamond tread platform is light, easy to transport and made from rugged TIG-welded 6061-T6 aluminum, providing maximum grip and an attractive finish.
OptionalRanger RML-1100 Motorcycle JackNOT included
(0 reviews)
€695,00 Ex. VATSelect options
QuickJack Portable Car Lifts
NEW QuickJack 7000TLX Portable Car Lift7000TLX portable car lift adds an extra 8CM bringing the lifting height to an impressive 61CM. This enhancement increases access to the undercarriage of the vehicle and provides an overall increase to your comfort and capability.
7000TLX Portable Car Lift
✓ Capacity: 3.175KG
✓ Liftpointspread: Min. 1091 mm Max. 1676mm
✓ collapsed: 89 mm
✓ Max height: 622 mm
✘ Hydraulic Oil not included208-240V AC Power-unit 50-60Hz
• Watt: 550
• Amps: 5-8
• C13 Connection, electric cord included plug type F (EU).(0 reviews)
€1.775,00 Ex. VATRead more
QuickJack Portable Car Lifts
TL Frame ExtensionsQuickJack’s TL frame extension kit increases the lift point spread of the 5000TL and 7000TL by 152mm. Sold as a pair, these easy-to-use, removable adapters require no setup whatsoever. They’re rugged, lightweight and give an TL model the same reach as an extended-length TLX model.
(0 reviews)
€285,00 Ex. VATRead more
QuickJack Portable Car Lifts
QuickJack Portable Car Lift Wall Hangers SetThese sleek, brushed-steel wall mounts are the only official hangers designed and engineered by QuickJack. They’re guaranteed to safely hold all QuickJack frames when mounted directly into a wall stud. Sold in sets of two.
(0 reviews)
€52,50 Ex. VATSelect options